Customized Degradable White Water Absorbing Spunbond PP Non-woven Fabric Rolls for Thermal Insulation Lining

Specification

Success Stories & Partners

Supply specialized SMS composite fabric for protective clothing to a well-known medical brand, with an annual supply of over 500 tons.

Assist a daily chemical giant in upgrading its wet wipe formula, achieving a 30% cost reduction and meeting environmental standards.

♻️ Becoming a designated biodegradable packaging supplier by an international environmental organization, with a cumulative replacement of 2000 tons of plastic film.

Advantage

• Why choose us?

  Cost optimization: Large scale procurement+intelligent scheduling, with prices 15% -20% lower than the market for the same quality.

  Agile response: Professional customer service team+technical consultant communicate one-on-one, and provide a solution within 48 hours.

  Worry free after-sales service: unconditional returns and exchanges for quality issues, and free material selection guidance provided.

  Flexible customization and strong adaptability:

  From weight, width to performance parameters, they can be customized according to specific customer scenario needs. Whether it is special size or special performance requirements, we can provide exclusive solutions to meet diverse and personalized needs.

After long-term exposure to wind and sun, it will pulverize

Instructions for use

1. Preparation in advance:

   Before use, it is necessary to check the appearance of the product to ensure that there is no damage or detachment of the aluminum plating layer. At the same time, according to the usage scenario, confirm the cutting size and prepare cutting tools (such as sharp scissors, knives) and installation tools (such as tape, zip ties, fixing nails, etc.).

2. Cutting and splicing:

   Cut the product in a straight line according to actual needs, keeping the edges neat and avoiding burrs during cutting; If splicing is required, hot melt splicing or special tape splicing can be used. The splicing should be flat and firm to ensure that the protective effect is not affected.

3. Install and fix

   (1),Package protection: When wrapping equipment, tightly wrap the product on the surface of the equipment, overlapping the edges by 5-10cm, and fix it with zip ties or tape to ensure no exposed parts and tight protection.

     (2),Covering installation: When used for covering greenhouses and sunshades, first unfold the product and cover it at the target position, leaving a fixed margin at the edge. Use fixing nails or ropes to fix it to the bracket to ensure that the coverage is flat, wrinkle free, and seamless.

    (3),Packaging usage: When used for item packaging, wrap the product on the outside of the item, overlap 2-3 layers, seal the edges with tape, and if necessary, use cushioning materials to enhance the protective effect.

  (4),Post maintenance: Regularly check the product status during use. If there is any damage or detachment of the aluminum plating (VMPET) layer, the damaged parts should be replaced in a timely manner; After use, if the product has no obvious pollution, it can be cleaned and dried, and stored in a dry, cool place, avoiding direct sunlight and humid environment to extend its service life.